Chillers 30HX

WATER-COOLED CHILLERS

Model : AQUAFORCE 30HX / Condenserless Water - Cooled

HIGH-EFFICIENCY INDOOR LIQUID SCREW CHILLER
75 to 265 Nominal Tons

30HXA - Condenserless
30HXC - Water-Cooled

The 30HX units are high-efficiency, indoor water-cooled or condenserless chillers. The units have a quiet, low-vibration design 
featuring screw compressors. The 30HX chillers are compact enough to fit through a standard door, making them great replacement units.

Water cooled chillers within the scope of the AHRI WCCL certification program are certified in accordance with the AHRI Water-Cooled Water-Chilling and 
Heat Pump Water-Heating Packages Certification Program, which is based on AHRI Standard 550/590 (I-P) and AHRI Standard 551/591 (SI). Certified units
may be found in the AHRI Directory at www.ahridirectory.org. Condenserless versions of these units and 50 Hz. units below 200 Tons are not certified under the AHRI certification program.

Feature

Performance Features
  1. - Chlorine-free HFC-134a refrigerant
  2. - Low energy consumption during part load and full load operation
  3. - 208/230 v, 230 v, 460 v, 575 v operational voltages available
  4. - Wye-delta start is standard on 208/230 v and 230 v 50/60 Hz units (factory-installed option for all other units)
  5. - Leaving-fluid temperature directly controlled to within 0.5°F (0.3°C)
  6. - Entering-fluid temperature continuously monitored to detect flow or load changes
  7. - Compatible with Carrier Comfort Network® (CCN) communication link
  8. - Heat recovery capability up to 135°F (57.22°C)
Reliability Features
  1. - Low voltage control circuits
  2. - Short cycle protection
  3. - Dual chiller control
  4. - Temperature reset from return fluid
  5. - Chilled water flow switch
  6. - Electronic refrigerant gauges
Maintenance Features
  1. - Hermetic twin screw compressors
  2. - Mechanically cleanable condenser and evaporator
  3. - Alarm contacts
  4. - Filter drier
  5. - Moisture indicating sight glass
  6. - Accessible service information including suction and discharge pressure and temperature using Navigator™ display module (factory-installed option or field-installed accessory)
  7. - ON/OFF control switch