Industrial Machinery

Injection Molding Machine
Machine Characteristics:

1. 1.The clamping unit adopts advanced design to make sure the platens parallel while they are moving. The high-pressure clamping control adopts Germany Rexroth's control parts. This makes the clamping force very precise and protects the mold and the machine.
2. 2.The mold clamping stroke and the capacity are bigger than traditional machine. It makes the machine suit to produce more kinds of product especially the barrel with deep depth.
3. 3.The machine is shorter than the traditional machine. This makes the machine needs smaller space and the factory can be use more efficiently.
4. 4.The machine can provide stable clamping force steadily while injecting. The molding will be done with higher yield rate.
5. 5.There is no toggle structure need for the LM series. The clamping unit needs less lubrication and the maintain cost and pollution will be lower.
6. 6.The mold opening speed is fast which less the molding cycle time.
7. 7.Mold is protected while low pressure which longer the mold life.
8. 8.Newly designed injection unit will provide precise injection.

Machine and Accessories:

1. Dehumidifying dryer and auto loader system for material.
2. Environment dehumidifying dryer system.
3. Chiller system.
4. Mold and hot runner temperature controller system.
5. Automatic system.

Machine Features:

1. Special injection construction designed to benefit for plasticizing.
2. By means of linear potentiometer(L/P) for injection and clamping unit. Deviation is under 0.01mm.
3. By use of PID temperature controller, which has limitations for screw cold starts, broken wire detection, temperature preservation, etc. Temperatures can be controlled by ยฑ1ยฐC.
4. Microprocessor controller with 4 stages injection, 3 stages holding pressure and 3 stages back pressure.
5. Shut-down memory is able to store up to 100 preset mold data memory.
6. Higher stability and lower defect in PET preform dimension.